Przemek
Więcej pomysłów od użytkownika Przemek
After the pour, we set our girt anchors to plum, aligned, and leveled. 15 piers in all, each directly under 15 6 x 6's that will support the entire frame.  After backfilling around the sonotubes, the 2 x 2' footer acts as an anchor.  The footers are poured directly on bedrock  2' deep.

After the pour, we set our girt anchors to plum, aligned, and leveled. 15 piers in all, each directly under 15 6 x 6's that will support the entire frame. After backfilling around the sonotubes, the 2 x 2' footer acts as an anchor. The footers are poured directly on bedrock 2' deep.

Beautiful cedar greenhouse, nice ground wall too. http://garden-greenhouse.se/

Beautiful cedar greenhouse, nice ground wall too. http://garden-greenhouse.se/

20131220_115530.jpg 900×1.600 pixels

20131220_115530.jpg 900×1.600 pixels

Portable Plywood Boat Plan

Portable Plywood Boat Plan

free punt plans

free punt plans

Name: 2011-12-25 20.24.13.jpg Views: 2862 Size: 79.7 KB

Name: 2011-12-25 20.24.13.jpg Views: 2862 Size: 79.7 KB

Scroll Bending vise mount mounted tool angle iron rod bend home made homemade metal shop scrolling tool tools  > ingenuity < KUDOS! from post:  Befriending ambiguity — kestrelcreek.com

Scroll Bending vise mount mounted tool angle iron rod bend home made homemade metal shop scrolling tool tools > ingenuity < KUDOS! from post: Befriending ambiguity — kestrelcreek.com

Press 4.jpg

Press 4.jpg

20 tons hydraulic press

20 tons hydraulic press

I wanted to build a large strong English wheel that would have minimal frame flex. I bought some beautiful upper and lower wheels from Hoosier Pattern, upon receiving them I knew that I had to build a nice machine to stand up to the quality of the wheels. After drawing up a few designs on the computer I picked up some raw steel 4”x8” .025 tube and went to work. Once done I painted it with some left over automotive paint   Build Description I started with 4"x8" .025 wall tube. I cut the main…

I wanted to build a large strong English wheel that would have minimal frame flex. I bought some beautiful upper and lower wheels from Hoosier Pattern, upon receiving them I knew that I had to build a nice machine to stand up to the quality of the wheels. After drawing up a few designs on the computer I picked up some raw steel 4”x8” .025 tube and went to work. Once done I painted it with some left over automotive paint Build Description I started with 4"x8" .025 wall tube. I cut the main…