Creative Spark Link Party #70 — Weekend Craft

Creative Spark Link Party #70 — Weekend Craft

Dress It Up - Most pegboard comes in two colors�boring white and boring brown. But it doesn't have to stay that way. Roll on a coat of primer followed by gloss or semigloss paint (glossy paints are easier to wipe clean). Apply light coats so you don't clog the holes. Then snazz it up with a frame. After we attached our pegboard to a 1x3 frame, we added corner blocks and trim with hot-melt glue�no fancy miter cuts or fasteners needed.

Dress It Up - Most pegboard comes in two colors�boring white and boring brown. But it doesn't have to stay that way. Roll on a coat of primer followed by gloss or semigloss paint (glossy paints are easier to wipe clean). Apply light coats so you don't clog the holes. Then snazz it up with a frame. After we attached our pegboard to a 1x3 frame, we added corner blocks and trim with hot-melt glue�no fancy miter cuts or fasteners needed.

How to make a Giant Peg Board for organizing craft supplies.

How to make a Giant Peg Board for organizing craft supplies.

Zip tie soup cans to peg boards. a little paint + these could look really awesome.

Zip tie soup cans to peg boards. a little paint + these could look really awesome.

Peg board storage by Kreisdesign http://kreisdesign.com/collections/peg-boards/products/peg-it-all-wall-mounted-storage-panel-in-natural-birch-plywood

Peg board storage by Kreisdesign http://kreisdesign.com/collections/peg-boards/products/peg-it-all-wall-mounted-storage-panel-in-natural-birch-plywood

organize anything with pegboard:   PEG BOARDING INSIDE CUP BOARDS  SEE TECHNIQUE

organize anything with pegboard: PEG BOARDING INSIDE CUP BOARDS SEE TECHNIQUE

When hanging pegboard, you want to make sure that the board is sitting 1/3" or so away from your wall so that the hooks, pegs, etc. can fit behind the board without damaging your wall. To do so, we put 7 washers on our screws to keep the board from the wall. You can also purchase little plastic spacers to go on your screws, but washers were a pretty cheap alternative. We also made sure to use wall anchors when hanging our pegboard, just to be safe and ensure that it can support the weight of…

When hanging pegboard, you want to make sure that the board is sitting 1/3" or so away from your wall so that the hooks, pegs, etc. can fit behind the board without damaging your wall. To do so, we put 7 washers on our screws to keep the board from the wall. You can also purchase little plastic spacers to go on your screws, but washers were a pretty cheap alternative. We also made sure to use wall anchors when hanging our pegboard, just to be safe and ensure that it can support the weight of…

Algo turquesa Peg Board Ferramenta de parede

Algo turquesa Peg Board Ferramenta de parede

Everyone should have a pegboard. Here's the Ultimate Guide to Pegboards, and why you should run out and get one right this minute! @diyjustcuz

Everyone should have a pegboard. Here's the Ultimate Guide to Pegboards, and why you should run out and get one right this minute! @diyjustcuz

attach small knobs to a peg board for instant jewelry organizer

attach small knobs to a peg board for instant jewelry organizer

Pinterest
Szukaj